-
Diverter Damper for Single CycleThe diverter damper is a change valve with one entrance and two exits; the designed diverter damper is installed horizontally, which can facilitate the flue gas to flow into the HRSG horizontally orread more
-
Duct Diverter Damper CustomThe bypass system comprises of Inlet duct, Diverter damper, Guillotine damper, Gas silencer, non-metallic expansion joint at the side of the bypass stack, Bypass steel structure, Bypass stack, andread more
-
OEM Diverter Damper IndustryThe diverter damper is a change valve with one entrance and two exits; the designed diverter damper is installed horizontally, which can facilitate the flue gas to flow into the HRSG horizontally orread more
-
OEM Diverter DamperThe diverter damper is a change valve with one entrance and two exits; the designed diverter damper is installed horizontally, which can facilitate the flue gas to flow into the HRSG horizontally orread more
-
Stainless Steel Butterfly Damper ValveThe driving mechanism of Main Stack Damper is driven by electric actuator, and the opening speed is 50 ~ 60S/ time, which makes the opening work stable and reliable.read more
-
Butterfly Damper Valves For Industrial Air And Gas Applic...The driving mechanism of Main Stack Damper is driven by electric actuator, and the opening speed is 50 ~ 60S/ time, which makes the opening work stable and reliable.read more
-
Shutter Type Main Stack DamperThe frame shall transfer all dead loads, induced wind shear load and wind moment load as calculated at the proposed location, consequentially the damper shell thickness shall be the same as theread more
-
Duct Diverter DamperThe bypass system comprises of Inlet duct, Diverter damper, Guillotine damper, Gas silencer, non-metallic expansion joint at the side of the bypass stack, Bypass steel structure, Bypass stack, andread more
-
Diverter Damper in HRSGThe damper is opened fully(90°), where the exhaust gas goes into the exhaust heat boiler directly (the machine unit is under the combined cycle).read more
-
Diverter Damper HRSGFlue gas damper is mainly used for waste heat recycling of the flue gas of gas turbine. When the waste heart enters, gas damper (in a level position) opens to let it into the boiler.read more
-
Electric Diverter DamperHPU independent design, supply, and in the workshop and damper linkage debugging, barrier function conformity; With big capacity of the accumulator, hydraulic station under emergency conditions canread more
-
Motorised Guillotine DamperGuillotine damper shall be operated only for maintenance of HRSG after the diverter damper is fully closed to the HRSG and mechanically locked.read more
Small rotary dampers can be connected by screwing or snapping into a component to provide dampened movements....
Rotary dampers of the WRD-H series are used to provide controlled damping of rotational movements of flaps, hoods and lids, among others. They offer a high torque output of up to 700 ... rotary...
Rotary dampers are extremely useful components for accurate opening and closing of small lids and drawers because they allow controlled deceleration. The torque in the rotary dampers is determined by...
A rotary damper is a device to decelerate an objective’s movement. It can demonstrate high torque despite being so invisible. See the below structure. It generally consists of the main...
Rotary Dampers | McMaster-Carr Rotation Direction Dual Direction Clockwise Counterclockwise Rotation Angle 105° 110° 130° 360° Shaft Type Gearless Geared Maximum Torque oz....
Damper. This is a genuine Rotary part. RCPW is an authorized Rotary products dealer. Be the first to review this product. $54.79. Brand: Rotary. Part Number: 11954. 10+ in stock. Typically ships...
