Mar 27, 2022

Why does the paint surface powder after the chimney is painted?

Leave a message

Why does the paint surface powder after the chimney is painted?


Coating powdering often occurs on the interior walls or flat roofs of polyvinyl alcohol coatings, and the surface of the coating film is powdery and easy to fall off. The primary reasons are:

(1) The maintenance time of the bottom layer is short and the moisture content is high.

(2) The water resistance of the coating itself is unqualified.

(3) The coating is not evenly mixed or diluted with water when it is used, and it is easy to powder in the thin part.

(4) The construction ambient temperature is lower than the film-forming temperature required by the coating.

The following precautions can be taken for chimney painting:

(1) The maintenance time of the bottom layer should meet the requirements, and the appearance must be dry and clean.

(2) Dilute according to the requirements of the paint factory manual, and do not add water at will. When using, pay attention to mixing evenly to avoid sedimentation.

(3) Choose good quality paint.

(4) The construction temperature should be above 10℃.


Send Inquiry