The damper door is a device used to connect the boiler system and the FGD system, and it has a great influence on the application of the boiler system and the FGD system. The flue gas damper door is mostly used as the entrance damper door of the FGD system, the FGD system outlet damper door and the bypass damper door in the FGD system. When the desulfurization system is in normal operation, the flue gas will enter the booster fan from the dust collector at the tail of the boiler through the inlet damper door of the FGD system, and then the flue gas will enter the absorption tower after being cooled by the heat exchanger. The flue gas is reheated to about 80°C by the flue gas heat exchanger, and finally enters the chimney through the outlet flue gas damper of the FGD system and is discharged into the atmosphere.
Now let's talk specifically about the matters needing attention when storing and installing the flue gas damper door.
Storage:
1) The baffle door must be stored on a dry horizontal surface, that is, on a flat ground with a square wood support, and the support point is on the frame around the baffle door. The distance between the supports must be appropriate to avoid deflecting the baffle door. There must be enough distance between the baffle door and the floor to avoid the interference and pollution of accessories such as the swing arm of the baffle door.
2) There should be necessary protective measures around the baffle door to prevent collision damage.
3) Baffle doors with stainless steel parts (sealing, sheet metal lining, etc.) must be protected to avoid damage.
