Dec 05, 2020

The garbage incinerator has good fire resistance and wear resistance

Leave a message

Having a dream is just a kind of intelligence, and realizing a dream is a kind of ability. At present, most of the refractory lining materials used in the front and rear arch areas are corundum mullite or mullite oxide materials. The waste incinerator has fire resistance, wear resistance, good thermal shock resistance and strong resistance Erosive. Take a look with the editor.

In the atmosphere of a garbage incinerator, they are oxidized, and the material easily reacts with garbage fly ash, etc., and is corroded and infiltrated, resulting in adhesion of ash and slag. Therefore, the incinerator lining needs to be stopped and cleaned during operation. Compared with oxide materials, non-oxide materials such as silicon carbide not only have good fire resistance, high hardness and good thermal shock resistance, but also silicon carbide materials are not easy to wet and have good corrosion resistance. The ability to resist ash erosion and adhesion greatly solves the problem of garbage fly ash adhesion. The developed corundum-silicon carbide and silicon carbide materials are widely used in channels and inclined tops of incinerators with good results. The results of the sample after the microstructure analysis anti-ash corrosion test show that the reaction interface between the oxide material without silicon carbide and the bulk material is unclear, the corrosion and penetration are serious, and the silicon carbide-containing material and the body are The reaction interface is weak. The ash is obvious. The ash is difficult to corrode the human body and it is not easy to adhere. With the increase of the silicon carbide content, the more obvious the interface, the stronger the ash corrosion resistance of the material.

In the process of using this type of furnace wall, the thermal stress caused by the fluctuation of the temperature difference in the furnace caused by the fluctuation of the humidity or heating value of the garbage, as well as the structural stress caused by repeated shutdowns and furnace operations, can easily lead to stress concentration. And bulging, in severe cases, it will fall off or collapse.


Send Inquiry