At the highest level, dampers have two distinct applications: HVAC (heating, ventilation and air conditioning) applications and industrial process applications. This article focuses primarily on damper types for industrial processes, although there is some inherent crossover.
A damper is a device that uses adjustable blades to regulate the airflow from one side of the damper to the other, and it may be located within a ductwork, between rooms, or between the exterior and interior of a building.
Dampers are more than simple air dampers. They are indispensable for controlling cool, warm, hot, dirty and even toxic air. They can also be used for fire protection. Dampers maintain air quality and provide worker safety, which is why they are essential for industrial airflow regulation.
Additionally, what makes dampers the best choice for large and complex systems is the variety of designs available - this gives you the flexibility to choose the type of damper that best suits your industrial processing system.
However, choosing the right option can be confusing and make you wonder: out of the different types of dampers, which one is right for you?
Often, each has a specific purpose, and choosing the right design is critical for long-term, stable operation.
In this guide, we'll walk you through the main types of industrial dampers and their applications to help you make your decision.
1. Multi-blade control damper
VC-400 Series Opposite Parallel
Multi-blade control dampers are often referred to as rectangular dampers or multi-blade louver dampers. These dampers are generally of two types depending on the vane action - the direction of rotation of the vanes in the control damper.
Parallel blade action means that all blades open and close at the same angle and direction.
Opposing vane action refers to the rotation of adjacent vanes in opposite directions.
As a very general rule, parallel vane dampers are used for opening/closing operation, while opposed vane dampers are used for modulating damper operation. However, parallel vanes provide better airflow control near the end of the operating range (closer to the fully open or fully closed position). Opposing vanes provide better airflow control throughout the operating range. When an advantage is provided, parallel vanes are typically used to direct or "throw" the air to one side, while the opposing vanes provide more laminar flow.
application
Multi-blade control dampers can withstand temperatures above 1800°F and pressures above 60 in. wg. This makes them ideal for many different industrial processes and applications.
Parallel vane dampers can be used in gas turbine inlets and outlets, fan inlets, atmospheric exhaust, scrubbers/oxidants, and dust collectors.
Opposed-blade dampers are ideal for fast power generation, air filter inlets, fan exhausts, and glass or metal tempered systems.
2. Single vane damper
VC-56 ISO Damper
Single vane dampers are often referred to as butterfly dampers or wafer dampers.
These dampers are available in round, square or rectangular varieties. Blades can be single thickness or double skin airfoil designs. In many cases, single-vane dampers can provide a cost-effective alternative to expensive valves.
application
Butterfly dampers can be used in a variety of applications, but are typically used for flow control and low leakage or isolation applications. These dampers can also be designed to withstand extreme design pressures and very high temperatures while maintaining low pressure drop across the system. Single-blade dampers can be used in systems with corrosive and abrasive airflow, making them ideal for environmental control and wastewater treatment applications.
3. Return and Pressure Relief Dampers
PR-13 Pressure Relief Damper and BD-56 Backdraft Damper
Commercial and Industrial Reverse Flow Dampers, also known as Gravity Dampers, are used in light, medium and heavy duty industrial and HVAC applications.
The reverse flow damper only allows automatic airflow in one direction while preventing reverse flow through the unit. Suction dampers are usually found on fans to prevent back pressure that could cause the fan to reverse.
Pressure relief dampers allow for these same functions, but do so at elevated, and in most cases adjustable, starting pressure. These dampers are typically used to prevent overpressure in the system.
application
Steel mills, utility plants, and oil refineries can all use suction and pressure relief dampers because these systems require large amounts of exhaust air as well as pressure relief and ventilation.
4. Front and Bypass Dampers
Bypass Damper
Front and bypass dampers are often referred to as steering dampers or T-dampers.
Dampers of this type are often used to redirect hot gases from turbines to heat recovery. These dampers are part of a dual-damper setup, usually found in a tee configuration.
application
Cogeneration units facing waste heat recovery boilers usually deploy face and bypass dampers. They can also be used in pollution control applications and in gas powered exhaust and heat recovery units.
5. Intake vane damper
VC-81 Intake vane damper
Inlet vane dampers are often referred to as inlet vane control (IVC dampers) or variable inlet vanes (VIV dampers).
These dampers are used to control the flow/pressure relationship of a fan or blower from the inlet side. They are usually installed at the inlet of the fan and can provide fan shutdown and control by rotating in a specific direction to pre-rotate the air entering the fan or blower.
These multi-blade circular dampers are designed to provide reliable and durable operation with proven cost savings for most fan or blower operations.
application
Intake vane dampers are popular in facilities that require complete control and regulation of their ventilation, such as automotive, flue gas and oven recirculation facilities.
6. Isolation Damper
SL-100BT – Airtight Isolation Damper and SG Series Guillotine Damper
Bubble seal dampers and knife dampers are two common categories of isolation dampers. These can be purchased for round and rectangular piping systems.
High-end bubble seal damper models provide the most reliable seal of any HVAC damper, ensuring no leaks when closed.
High-end guillotine damper models can be equipped with a sealed fan for zero leakage while virtually eliminating pressure drop across the damper. The main function of a guillotine door is to isolate and close the piping system to shut down equipment and perform maintenance.
application
Bubble seal dampers are commonly used in wastewater treatment facilities. Guillotine dampers are commonly used for scrubber inlet and outlet isolation, flue gas purification, chimney isolation and dust collector isolation.
