Dec 06, 2020

About The Steam Exhaust Of The Silencer

Leave a message

First: Uses and product advantages Boiler steam mufflers are mainly used for effective muffling of boiler steam emissions and other gas muffling emissions in electric power, petroleum, chemical, metallurgy, textile and other industries. It is an important measure to eliminate steam emission noise. The exhaust steam of various boilers is not only high temperature and high pressure, but also has a wide emission frequency. To measure the quality of steam emission mufflers, the following three aspects are mainly considered:

1. The sound attenuation of boiler steam muffler can meet the requirements of "Industrial Enterprise Noise Standard". 2. The muffler can adapt to different frequencies, high temperatures and pressures (low, medium and high pressure, ultra high pressure, subcritical, supercritical).

3. The muffler has a good structure (reasonable size, high strength, long life, easy installation).


Second, the principle of muffler boiler steam muffler is mainly based on the principle of "small hole injection" combined with impedance expansion and sound absorption. The boiler steam discharge generally has a fast flow rate and high airflow noise. It needs to be expanded with through holes first. The steam after the second through-hole gets pressure-reduced flow in the resistant expansion chamber, and the air flow is sprayed out through the small holes. After spraying, the sound power of each octave band has been reduced, and the frequency of the sound pressure level is pushed up to more than 20000Hz Range, the noise is greatly reduced, but the secondary noise of some frequencies needs to be further muffled. We install a resistive sound-absorbing cotton structure in the expansion outdoor, which is designed according to the spectral characteristics of the residual noise emitted by the pressure reducing body , To effectively absorb the remaining noise. When the user installs as required, the noise reduction can reach 30-42 decibels. Make it meet the requirements of <<Industrial Enterprise Noise Standard>>.


Third, the muffler ordering and selection boiler steam muffler is carefully designed according to the requirements of various parameters. The following information must be provided when ordering the exhaust steam muffler to obtain the maximum muffler effect:

1) How much steam discharge (T/h), pressure, temperature.

2) Exhaust pipe diameter and wall thickness.

3) The structure can choose small hole type or spray resistance composite type. General users choose composite muffler, which has good noise elimination effect, the material is stainless steel, and the shell material is carbon steel; the pipe can be welded or flanged; the legs can be leg-type or ear-type structure;


Send Inquiry