There are many types of silencers, but in terms of their silencing mechanism, they can be divided into six main types, namely resistive silencer, resistant silencer, impedance compound silencer, micro-perforated plate silencer, and small holes Silencer and active silencer.
Resistive muffler
It mainly uses porous sound-absorbing materials to reduce noise. The sound-absorbing material is fixed on the inner wall of the airflow channel or arranged in the pipeline in a certain way to form a resistive muffler. When the sound wave enters the resistive muffler, a part of the sound energy is rubbed in the pores of the porous material and converted into heat and is dissipated, so that the sound wave passing through the muffler is weakened. The resistive muffler is like a pure electrical resistance circuit, and the sound-absorbing material is similar to a resistor. Therefore, people call this type of muffler a resistive muffler. The resistive muffler has good muffling effect on medium and high frequency, but poor muffling effect on low frequency. (Mainly used for silencer of generator set)
Resistant silencer
It is a combination of a tube and a chamber with a sudden interface. It seems to be an acoustic filter, similar to an electrical filter. Each small chamber with a tube is a mesh of the filter, and the air quality in the tube is equivalent to that of the electrical Inductance and resistance are called acoustic quality and acoustic resistance. The volume of air in the chamber is equivalent to the electrical capacitance, which is called acoustic compliance. Similar to electrical filters, each small room with tubes has its own natural frequency. When sound waves containing various frequency components enter the first short tube, only certain frequencies near the natural frequency of the first mesh can pass through the mesh to reach the second short tube orifice. Sound waves cannot pass through the mesh. It can only reflect back and forth in the small room, so we call this structure that has a filtering function for sound waves as an acoustic filter. Select the appropriate tube and chamber to combine. It can filter out the noise of certain frequency components, so as to achieve the purpose of noise elimination. Resistant silencer is suitable for eliminating mid- and low-frequency noise.
Compound silencer
It is composed of resistive structure and resistive structure in a certain way.
silencer
Generally, it is made of a pure metal sheet with a thickness of less than 1mm, and a drill with a hole diameter of less than 1mm is used to perforate the sheet, and the perforation rate is 1% to 3%. Choosing different perforation rates and cavity depths with different plate thicknesses can control the spectral performance of the muffler so that it can achieve a good muffler effect within the required frequency range.
Small hole silencer
The structure is a straight pipe with closed ends, with many small holes drilled in the pipe wall. The principle of the small hole silencer is based on the frequency spectrum of the jet noise. If the total area of the nozzle remains unchanged and many small nozzles are used instead, when the airflow passes through the small hole, the spectrum of the jet noise will shift to high frequency or The ultra-high frequency significantly reduces the audible sound components in the frequency spectrum, thereby reducing interference and harm to people.
Active silencer
The basic principle is that in the original sound field, electronic equipment is used to generate a sound wave with the same magnitude and opposite phase as the original sound pressure, so that it can cancel out the original sound field within a certain range. This kind of silencer is a set of equipment, mainly composed of microphone, amplifier, phase shift device, power amplifier and loudspeaker.
