Double-layer flue gas baffle valve is also called desulfurization flue gas baffle door. Double-layer shutter type baffle damper is used for flue gas desulfurization system absorption tower inlet, outlet or bypass flue, or for flue gas denitration and smoke In the gas dust removal system, the air door usually adopts the louvered double-layer baffle layout. When the double-layer baffle is shut off, a sealed atmosphere is introduced to cut off the air seal, which realizes the sense of isolation and shutting off the flue gas.
SGD double-layer shutter baffle layout commonality
1. Adopt a single-axis drive double-louvered baffle layout, and a sealed chamber for introducing a sealed atmosphere is planned at both ends of the double-layer blades. The sealed atmosphere higher than the flue gas pressure is passed into the baffle to form a gap between the double-layer baffles. Seal the atmosphere insulation layer to block the end of the flue gas flow.
2. The opening and closing time of the air door ≤60S (can be selected according to user request).
3. There is a linkage mechanism in the internal plan to lock or unlock several blades synchronously.
4. The double shutter type desulfurization baffle door has a fair layout, good blade rigidity, stable and reliable operation, and the shutter type baffle blade sealing type: elastic sealing and good sealing.
5. A sealed air outlet valve is planned to be installed on the double baffle. After the sealing atmosphere is introduced, the sealing yield of the baffle door is: 100%
6. Drive action: pneumatic or electric
7. Drive placement usually adopts direct connection and air door connection installation.
8. Electric placement adopts electromechanical integrated products, with torque consideration and limit placement, and remote control and operation. Electric placement also has manual and electric switching efficiency to prepare for monopoly during installation, commissioning and inspection.
9. Connection action between air door and pipeline: flange sealing welding connection or flange bolt connection.
SGD double-layer shutter baffle technical parameters
1. Cross section of flue: W (width) × H (height) × L (thickness);
2. Applicable medium: hot and cold flue gas damper door;
3. Plan temperature resistance: ≤300℃;
4. Planning pressure: ±500Pa
5. Internal and external leakage rate of flue gas: "0"
6. Drive action: electric or pneumatic;
7. Power supply and management request: selected by the user.
