Oct 26, 2021

Talking about the Principle of Coking in Waste Incinerator

Leave a message

Talking about the Principle of Coking in Waste Incinerator

1. Since the initial deposition layer is mainly caused by the condensation of volatile ash components and the thermal migration of small particles, it is difficult to prevent the formation of the initial deposition layer in actual operation. The main factors that pose a threat to the safe operation of garbage incinerators are Inertial deposition.


2.The adhesion of the ash particles transported by inertia on the initial deposition layer is not only related to the properties of the initial layer, but also related to the temperature of the impact ash particles. When the temperature of the impact ash particles is very high and is in a molten liquid state, Adhesion is easy to occur, which intensifies the coking process


3.The thickness of the ash coke layer is usually uneven, which is related to the structure of the furnace, the middle position of the combustion, aerodynamic characteristics, the temperature characteristics of the furnace and the physical and chemical properties of the fuel.


4.In the different positions of the waste incinerator furnace, the thickness and structure of the coke block will be very different.Compared with general fuel combustion, waste incineration has low calorific value, high water content, and relatively inferior texture.


5.The incineration process of garbage incinerators is extremely complicated. The shape of garbage is uneven, and the quality varies with seasons, years and regions, and the corresponding calorific value varies greatly, resulting in large fluctuations in the temperature and composition of the flue gas during the incineration process.


The incineration process of garbage incinerators is more complicated than the usual fuel combustion process.It can be said that the inherent characteristics of garbage itself determine its easy coking characteristics.


Send Inquiry