Oct 31, 2023

Gate corrosion environment and influencing factors

Leave a message

Gate corrosion environment and influencing factors

Steel structure gates are important components for controlling water levels in hydraulic structures such as hydropower stations, reservoirs, sluices, and ship locks. It should be immersed in water for a long time, alternate between dry and wet frequently when opening and closing, and rinse with high-speed water. Especially in the waterline part, steel is easily corroded by water flow, sunlight, aquatic organisms, water waves, sediment, ice and other floating objects, which significantly reduces the load-bearing capacity of steel gates and seriously affects the service life of steel gates. Affect the safety of water conservancy projects. Some use coating protection, which generally expires after 3 to 5 years of use, resulting in low work efficiency and high maintenance costs.

 

Corrosion not only affects the safe operation of the structure, but also consumes a lot of manpower, material and financial resources for anti-corrosion work. According to statistics from some sluice projects, the annual expenditure on gate anti-corrosion accounts for about half of the annual maintenance costs. At the same time, a large amount of labor must be mobilized for rust removal, paint removal or painting. Therefore, in order to effectively control the corrosion of steel, extend the service life of steel gates, and ensure the integrity and safety of water conservancy and hydropower projects, the long-term anti-corrosion problem of steel gates has attracted widespread attention.

 

The corrosive environment of steel structure gates and factors affecting corrosion:

1. Corrosive environment of steel structure gates

Some steel gates and steel structures in water conservancy and hydropower projects have been immersed in various water qualities (seawater, fresh water, industrial wastewater, etc.) for a long time; some are often in dry and wet environments due to water level changes or gate opening and closing; some are also subject to high-speed water flow It is also affected by the friction of sediments, floating objects and ice; the water surface or the part above the water surface is also affected by the humid atmosphere where water evaporates and splashes water mist; structures working in the atmosphere are also affected by sunlight and air. Since the working environment of hydraulic gates is harsh and there are many influencing factors, it is necessary to analyze the corrosion factors.

 

2. Corrosion factors

(1) Climatic factors: The wading part of the steel structure sluice is easily corroded by the sun, rain and humid atmosphere.

(2) Surface conditions of steel structures: Roughness, mechanical damage, cavitation, welding defects, gaps, etc. have a great impact on corrosion.

(3) Stress and deformation: The greater the stress and deformation, the more serious the corrosion.

(4) Water quality: Fresh water has low salt content, its chemical composition and degree of pollution are different, and the corrosion of the gate is also different; seawater has high salt content and good electrical conductivity. Seawater contains a large amount of chloride ions, which is highly corrosive to steel. Steel gates corrode more seriously in seawater than in fresh water.

Send Inquiry