Diverter Damper With Seal System
The air sealing system composes of:
◆ 2 high-pressure air fans
◆ Air tube and pipe expansion joint
◆ 2 groups of electronic butterfly valves
◆ 4 groups of one-way check valves
◆ Internal sealing channel of diverter damper
◆ 2 pieces of different pressure transmitter
The high-pressure air fan is connected with the double-deck flexible sealing fin on the damper and the fixing gland on the casing through the pipes, which forms the entrance of the ring air sealing channel. The entrance is designed the check valve to prevent the high-temperature exhaust gas from backflow; the two groups of electrical high-temperature butterfly valves installed on the pipe can change the system to send air towards the bypass side or the boiler side; when the damper has a temperature of 0° or 90°, the air sealing system is ready for use at any time and runs continuously.

The damper has four sealing sides, which are formed by a series of high-temperature flexible metallic spring pieces. When the damper has a temperature of 0° or 90°, the sealing piece and the fixing sealing stand come to together to form a sealing space inside the flue; when the high-pressure air goes into the flue, the air curtain is thence formed to prevent the exhaust gas from external discharge; at this moment the sealing efficiency is 100%.

Hot Tags: diverter damper with seal system, China, suppliers, manufacturers, factory, buy, Diverter Damper For Combined Cycle, Diverter Damper Control System In Container, Lightning protection diverter damper, diverter damper base, Diverter Damper With High Sealing Performance, Diverter Damper HRSG







